Quick Answer: What Is A 5050 Led?

What is the best LED chip on the market?

Top 10 LED Chips You Should Consider for Your LED Lighting FixtureCREE.

Manufactured in the USA, CREE is one of the leading LED chip brands in the world with SMD LED chips ranging from 0.1W up to 5W and COB from 5W up to 200W.

NICHIA.

Toyoda Gosei.

OSRAM.

Lumileds (Philips) …

Seoul Semiconductor.

LG Innotek.

Edison Opto.More items…•.

Which is better Cree or COB LED?

The main or the most evident difference between the two is their physical appearance. The SMD Cree led high bay is physically larger and has a wider PCB area than the COB. … When in use, both the LEDs produce a lot of heat. This is as a result of the mechanism or technology behind them.

Which is better SMD or LED?

One of the biggest improvements is that SMD spotlights offer a higher lumen output for a lower energy consumption – making them more powerful and energy efficient than older LED lights. … The brightness here is 268 lumens at 2.5W of power consumption.

What is the brightest type of LED?

What is the brightest LED type? Yes, as you can see by the table above, 5630 LEDs are by far the brightest, but it is not due simply to a larger lighting surface. There are other factors that go into the output of an LED diode (measured in luminous flux/lumens).

Is 3000 lumens too bright?

A foot-candle is a measure of how bright the light will be when you are a foot away from the light source. … 30-40 foot candles are around 3,000-4,000 lumens. In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom.

WHAT LED bulb is equivalent to 100 watt?

Best color quality: GE Reveal 100W Replacement Bright Stik LEDCree 100W Replacement LEDTarget Up & Up 100W Replacement Non-Dimmable LEDBrightness (in lumens)1,606 (1,650 claimed)1,603 (1,500 claimed)Energy usage (in watts)16.515Efficiency (lumens per watt)97.3106.9Color temperature2,700 K3,000 K6 more rows•Feb 24, 2018

What is brighter xenon or LED?

Xenon HID headlights, or high-intensity discharge, are a common alternative to halogen bulbs. … These headlights are usually brighter than LEDs and halogens, but they are significantly more fragile, and they are not solid state in the same way as LEDs.

What is the strongest Cree LED?

Cree has crammed up to 2,250 lm capability into a 5x5mm LED – achieved at 19W. The LED is called XHP50, the first in a family of XHP lighting LEDs.

Do LED strips use a lot of electricity?

Installed as your light source, LED strip lights guzzle less electricity to produce the same light output. The potential savings are very significant – LEDs draw up to 85% less electricity than conventional incandescent lighting, and around 18% less electricity than CFLs (Compact Fluorescent Lamps).

Can LED strip lights catch fire?

The LED strip should not get hot enough to ignite cardboard by itself, but you want to avoid a short, which could start a fire.

How many amps does a 60 watt LED bulb draw?

0.54 AmpsA 60 Watts bulb draws 0.54 Amps to operate.

What voltage do LEDs use?

Typically, the forward voltage of an LED is between 1.8 and 3.3 volts. It varies by the color of the LED. A red LED typically drops around 1.7 to 2.0 volts, but since both voltage drop and light frequency increase with band gap, a blue LED may drop around 3 to 3.3 volts.

What is the lifespan of LED lights?

50,000 hoursMany LEDs have a rated life of up to 50,000 hours. This is approximately 50 times longer than a typical incandescent, 20-25 times longer than a typical halogen, and 8-10 times longer than a typical CFL. Used 12 hours a day, a 50,000 bulb will last more than 11 years.

What is the difference between 5630 and 5050 led?

The 5630 (5730) LED is basically a stretched 5050 LED with a much wider viewing angle. Making the 5630 (5730) LED the brightest of all 3 with the lowest power consumption per watts. The wider angle makes it easy to emit a brighter output with the same wattage.

How much power does a 5050 LED strip use?

The 5050 regular density LED light strip is listed at two watts per foot, so for thirty feet of light, you’ll be drawing sixty watts of power, and as it just so happens, we’ve got sixty watt power supplies!

Are LED Strip Lights bad for your eyes?

The AMA says that life-long exposure of the retina and lens to blue peaks from LEDs can increase the risk of cataract and age-related macular degeneration. Studies also reveal that light emitted by LEDs can cause retinal changes, if there is high exposure for even a short period of time.

What does SMD mean for LED lights?

surface mounted diodeSMD means surface mounted diode. This is a better technology than the first generation DIP LEDs. The SMD type LEDs are mounted on an aluminum substrate and enveloped in an epoxy resin.

What is the difference between SMD LED and LED?

Light emitting diodes date back to the early 1960s. However, for decades LEDs did not have many practical applications due to their manufacturing cost. … An SMD LED is a surface-mount LED that reduces the size of the light while at the same time adding more colors to a single LED.

What is the difference between 5050 and 3528 LED lights?

The 3528 typically contains a single 20 mA LED chip (approximately 0.06 Watts) and a 5050 typically contains three 20 mA LED chips (approximately 0.2 Watts). Therefore, a single 5050 LED package has the capacity of 3x 3528 LEDs. … There are some 3528 RGB LEDs, but these typically contain only one color per LED.

How do I know what type of LED strip?

If you really want to determine the type of LED strip (for whatever reason) you can always measure the dimensions using a caliper. The 4-digit numbers refer to the LED package dimensions in tenths of millimeters (i.e. 2835 = 2.8 mm x 3.5 mm).