Quick Answer: What Does The Kitemark Mean On Glass?

Is there anyway to cut tempered glass?

The only possible way to cut & customize tempered glass is with the use of special laser cutters, and this cannot be done at home.

So, homeowners must seek professional help if they really need to cut & customize the tempered glass without making it lose its strength & durability..

Does tempered glass crack easily?

Tempered glass can’t shatter but it can still break It breaks unevenly, some large pieces and some small. You sweep it up, but inevitably those jagged, teeny-tiny shards get left behind and sometimes end up in your foot.

Is all safety glass marked?

BS EN 12600:2002 requires that ALL safety glazing materials are permanently marked in a position that will be visible after glazing with the following: The British Standard number BS EN12600:2002.

How do you know if its safety glass?

Look closely at the pane and try to spot dimples, warping or bending. Such imperfections strongly suggest the glass is of the toughened safety variety, and occur during the heating process: Due to the very high temperatures required in the manufacturing process, tongs are used. These tongs leave marks on the glass.

What is kite mark on glass?

The Kitemark symbol of quality was first conceived in 1903 to identify glazing solutions that were at the pinnacle of safety and reliability. Today, glass kite marks remain as one of the oldest product quality marks in the world still in use.

What does the Kitemark symbol mean?

The Kitemark was originally conceived in 1903 as a symbol to identify products manufactured to meet British Standards’ specifications. “Kitemark” came from the kite shape of the graphic device which was drawn up – an uppercase B (for British) on its back, over an S (for standard), enclosed by a V (for verification).

How can you tell the difference between tempered glass and normal glass?

Tempered glass has smooth edges So, one good way is to look thoroughly at the edges of the glass. Tempered sheets have smooth and even edges because of the extra processing it goes through. On the other hand, if the glass is not tempered, the edges feel rough to touch.

Can you drill holes in tempered glass?

Drilling into tempered glass requires special diamond drill bits in order to cut through the dense glass. The procedure can be long depending on the thickness of the glass, and the drill bit needs constant lubrication in order to make it through the glass.

What products have the BSI Kitemark?

Manufacturers with the BSI Kitemark are an elite club of some of world’s best companies and brands. There are currently more than 2,500 BSI Kitemark licences, held by, amongst others, Anglian Home Improvements, Chubb Security & Fire Protection, Everest, Hygena, Tarmac and Valor, to name but a few.

Does tempered glass break?

Apart from its strength, tempered glass is also known for the characteristic way it breaks. … Unlike regular glass, which shatters into sharp shards that can potentially cause injuries, tempered glass breaks into smaller pieces that interlock with neighboring pieces and therefore don’t fall readily.

When should safety glass be used?

Safety glass should be fitted in all doors and other windows or glazed areas that are lower than 800mm from the floor level. Glass panels less than 250mm wide can be fitted with 6mm glass or laminated glass instead of toughened glass. In doors where the glass comes within 1500mm from floor level.

Does toughened glass have to have a Kitemark?

Toughened glass is required to be marked with BS6206a, this can take the form of the circulaur BS Kitemark or a simple line. It is also possible that the glass is laminated, which will also satisfy the requirement for safety glass, if so it is unlikley to be marked.

Do windows need a Kitemark?

The BSI Kitemark scheme for Window Energy Rating (WER) is based on the approved document L1B of the Building Regulations which comes into force on 1st October 2010. This stipulates that all replacement windows must have: A Window Energy Rating (WER) of at least band C or.

How can you tell if glass is heat resistant?

Examine the Edges Because tempering requires extra processing, the edges of tempered glass are usually completely smooth, while those of annealed glass are often ridged, scuffed and imperfect. Run your finger along the edges — if they are exposed.

How much force does it take to break tempered glass?

The equation for stress is force/area. According to http://www.alumaxbath.com/tech/tgp.htm, the stress required to break tempered glass is about 24,000 psi.

Why does tempered glass break so easily?

There are many potential causes for spontaneous breakage of tempered glass. The most common is damage to the edges of glass as it is being pre-cut into panels, or nicks or chips to the edges that occur when the glass is being packaged, shipped, or installed onsite.